I had a POC for a Cisco ASR9K so I deployed an IOS-XRv virtual machine in my lab to play around with it.
I downloaded an IOS-XRv demo OVA file and import in VMware Workstation. To import, go to File > Open > rename the virtual machine > Import.
The OVA demo file had two Network Adapters, so I set the first Network Adapter as Custom: VMnet0 (192.168.1.0/24 subnet in my lab) > removed the second Network Adapter > click OK > Power on this virtual machine.
Just click Yes to continue.
You'll see a Booting 'IOS XRv' output during initial bootup. You'll need to increase the memory (RAM) and Hard Disk space on the VM in order to properly bootup.
I increased the Hard Disk to 80 GB and added a Serial Port in order to monitor the bootup process via the console.
You'll see a blank prompt which indicated the VM has completed its bootup.
You'll need to install Named Pipe TCP Proxy to view the console output.
Click the connector icon > type the Pipe name: \\.\pipe\xr1 > type a Port number (you can use any abritrary number) > click Add.
Open a terminal emulator (I used SecureCRT in this case) > choose Telnet > type the IP address: 127.0.0.1 (loopback IP). You'll be initially asked to create a root-system username (aside from the system default: cisco/cisco).
Notice the Named Pipe TCP Proxy Status is now Connected.
Below are some basic configuration in order to remotely access the IOS-XRv and eventually eliminate the use of Named Pipe Proxy.
ios con0/0/CPU0 is now available
Press RETURN to get started.
IMPORTANT: READ CAREFULLY
Welcome to the Demo Version of Cisco IOS XRv (the "Software").
The Software is subject to and governed by the terms and conditions
of the End User License Agreement and the Supplemental End User
License Agreement accompanying the product, made available at the
time of your order, or posted on the Cisco website at
www.cisco.com/go/terms (collectively, the "Agreement").
As set forth more fully in the Agreement, use of the Software is
strictly limited to internal use in a non-production environment
solely for demonstration and evaluation purposes. Downloading,
installing, or using the Software constitutes acceptance of the
Agreement, and you are binding yourself and the business entity
that you represent to the Agreement. If you do not agree to all
of the terms of the Agreement, then Cisco is unwilling to license
the Software to you and (a) you may not download, install or use the
Software, and (b) you may return the Software as more fully set forth
in the Agreement.
Please login with any configured user/password, or cisco/cisco
User Access Verification
Username: cisco
Password:<cisco>
RP/0/0/CPU0:ios#configure terminal
Thu Mar 5 10:36:57.885 UTC
RP/0/0/CPU0:ios(config)#hostname XRv-LAB // DEFAULT HOSTNAME IS 'ios'
RP/0/0/CPU0:ios(config)#
RP/0/0/CPU0:ios(config)#show config // VIEW TARGET CONFIG
Thu Mar 5 10:37:21.293 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
hostname XRv-LAB
end
RP/0/0/CPU0:ios(config)#
RP/0/0/CPU0:ios(config)#commit // APPLY CHANGE IN RUNNING CONFIG; THERE'S NO write memory IN IOS-XR
Thu Mar 5 10:37:26.873 UTC
RP/0/0/CPU0:Mar 5 10:37:26.913 : ike[228]: %SECURITY-IKE-4-WARNING : You may want to configure a domain-name
RP/0/0/CPU0:XRv-LAB(config)#load ?
WORD Load from file
bootflash: Load from bootflash: file system
commit Load commit changes
configuration Contents of configuration
diff Load from diff file
disk0: Load from disk0: file system
disk0a: Load from disk0a: file system
disk1: Load from disk1: file system
disk1a: Load from disk1a: file system
ftp: Load from ftp: file system
nvram: Load from nvram: file system
rcp: Load from rcp: file system
rollback Load rollback changes
tftp: Load from tftp: file system
RP/0/0/CPU0:XRv-LAB(config)#load rollback ?
changes Load configuration changes to be made during a rollback operation
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes ?
last Changes for rolling back last <n> commits
to Changes up to (and including) a specific commit
1000000039 Commit ID
1000000038 Commit ID
1000000037 Commit ID
1000000036 Commit ID
1000000035 Commit ID
1000000034 Commit ID
1000000033 Commit ID
1000000032 Commit ID
1000000031 Commit ID
1000000030 Commit ID
1000000029 Commit ID
1000000028 Commit ID
1000000027 Commit ID
1000000026 Commit ID
1000000025 Commit ID
1000000024 Commit ID
1000000023 Commit ID
1000000022 Commit ID
1000000021 Commit ID
1000000020 Commit ID
1000000019 Commit ID
1000000018 Commit ID
1000000017 Commit ID
1000000016 Commit ID
1000000015 Commit ID
1000000014 Commit ID
1000000013 Commit ID
1000000012 Commit ID
1000000011 Commit ID
1000000010 Commit ID
1000000009 Commit ID
1000000008 Commit ID
1000000007 Commit ID
1000000006 Commit ID
1000000005 Commit ID
1000000004 Commit ID
1000000003 Commit ID
1000000002 Commit ID
1000000001 Commit ID
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes last ?
<1-39> Number of commits
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes last 1 // ROLLBACK TO PREVIOUS RUNNING CONFIG
Building configuration...
Loading.
48 bytes parsed in 1 sec (47)bytes/sec
RP/0/0/CPU0:ios(config)# // HOSTNAME ROLLBACK TO ios
RP/0/0/CPU0:ios(config)#hostname XRv-LAB
RP/0/0/CPU0:ios(config)#commit
Thu Mar 5 10:38:10.427 UTC
RP/0/0/CPU0:XRv-LAB(config)#
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#show config
Thu Mar 5 10:39:16.466 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
end
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#clear // REMOVE TARGET CONFIG; OR JUST SIMPLY TYPE THE abort COMMAND
RP/0/0/CPU0:XRv-LAB(config)#
RP/0/0/CPU0:XRv-LAB(config)#show config
Thu Mar 5 10:39:30.625 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
end
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#commit ?
best-effort Commit the configuration changes via best-effort operation
comment Assign a comment to this commit
confirmed Rollback this commit unless there is a confirming commit
force Override the memory checks
label Assign a label to this commit
replace Replace the contents of running configuration
save-running Save running configuration to a file
<cr> Commit the configuration changes to running
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed ?
<30-65535> Seconds until rollback unless there is a confirming commit
minutes Specify the rollback timer in the minutes
<cr> Commit the configuration changes to running
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed 30 // ROLLBACK CONFIG AFTER 30 SECONDS
Thu Mar 5 10:41:34.646 UTC
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:41:56.645 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
<AFTER 30 SECONDS>
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:42:23.353 UTC
Interface not found (Loopback0)
RP/0/0/CPU0:XRv-LAB(config-if)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed 30
Thu Mar 5 10:45:24.980 UTC
One or more commits have occurred from other
configuration sessions since this session started
or since the last commit was made from this session.
You can use the 'show configuration commit changes'
command to browse the changes.
Do you wish to proceed with this commit anyway? [no]: yes
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:45:52.088 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#commit // APPLY CHANGES IN RUNNING CONFIG
Thu Mar 5 10:45:56.038 UTC
% Confirming commit for trial session.
RP/0/0/CPU0:XRv-LAB(config-if)#end
RP/0/0/CPU0:XRv-LAB#show interface loopback0
Thu Mar 5 10:46:17.087 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
RP/0/0/CPU0:XRv-LAB#show ip interface brief
Thu Mar 5 10:49:37.063 UTC
Interface IP-Address Status Protocol
Loopback0 1.1.1.1 Up Up
MgmtEth0/0/CPU0/0 unassigned Shutdown Down
RP/0/0/CPU0:XRv-LAB#configure terminal
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#description ### TEST ###
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#show config merge interface loopback0 // DISPLAY MERGED TARGET AND RUNNING CONFIG
Mon Mar 23 09:00:21.784 UTC
interface Loopback0
description ### TEST ###
ipv4 address 1.1.1.1 255.255.255.255
!
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 10:50:49.668 UTC
RP/0/0/CPU0:XRv-LAB(config)#interface ?
BVI Bridge-Group Virtual Interface
Bundle-Ether Aggregated Ethernet interface(s)
Bundle-POS Aggregated POS interface(s)
CEM Circuit Emulation interface(s)
GigabitEthernet GigabitEthernet/IEEE 802.3 interface(s)
IMA ATM Network Interface(s)
InterflexLeft InterFlex Left interface(s)
InterflexRight InterFlex Right interface(s)
Loopback Loopback interface(s)
MgmtEth Ethernet/IEEE 802.3 interface(s)
Multilink Multilink network interface(s)
Null Null interface
POS Packet over SONET/SDH network interface(s)
PW-Ether PWHE Ethernet Interface
PW-IW PWHE VC11 IP Interworking Interface
Serial Serial network interface(s)
preconfigure Specify a preconfig
tunnel-ip GRE/IPinIP Tunnel Interface(s)
tunnel-ipsec IPSec Tunnel interface(s)
tunnel-mte MPLS Traffic Engineering P2MP Tunnel interface(s)
tunnel-te MPLS Traffic Engineering Tunnel interface(s)
tunnel-tp MPLS Transport Protocol Tunnel interface
RP/0/0/CPU0:XRv-LAB(config)#interface MgmtEth0/0/CPU0/0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 192.168.1.150 255.255.255.0
RP/0/0/CPU0:XRv-LAB(config-if)#no shutdown
RP/0/0/CPU0:XRv-LAB(config-if)#commit
Thu Mar 5 10:51:59.353 UTC
RP/0/0/CPU0:Mar 5 10:51:59.403 : ifmgr[226]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/0/CPU0/0, changed state to Down
RP/0/0/CPU0:XRv-LAB(config-if)#RP/0/0/CPU0:Mar 5 10:51:59.433 : ifmgr[226]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/0/CPU0/0, changed state to Up
RP/0/0/CPU0:XRv-LAB(config-if)#do ping 192.168.1.1
Thu Mar 5 10:52:08.803 UTC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/14/59 ms
C:\Users\User>ping 192.168.1.150 // PING FROM SOURCE IP 192.168.1.100 (WINDOWS 10)
Pinging 192.168.1.150 with 32 bytes of data:
Reply from 192.168.1.150: bytes=32 time=1ms TTL=255
Reply from 192.168.1.150: bytes=32 time=1ms TTL=255
Ping statistics for 192.168.1.150:
Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
Control-C
^C
C:\Users\User>telnet 192.168.1.150
Connecting To 192.168.1.150...Could not open connection to the host, on port 23: Connect failed
You'll need to explicitly configure the remote access (Telnet or SSH) under the control-plane.
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 11:04:45.601 UTC
RP/0/0/CPU0:XRv-LAB(config)#telnet ?
ipv4 IPv4 configuration
ipv6 IPv6 configuration
vrf VRF name for telnet server
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 ?
client Telnet client configuration commands
dscp dscp
server Telnet server configuration commands
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server ?
max-servers Set number of allowable telnet sessions
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server max-servers ?
<1-100> Set number of allowable telnet sessions
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server max-servers 3
RP/0/0/CPU0:XRv-LAB(config)#domain name ?
WORD Default domain name
RP/0/0/CPU0:XRv-LAB(config)#domain name lab.com
RP/0/0/CPU0:XRv-LAB(config)#commit
Thu Mar 5 11:07:00.782 UTC
RP/0/0/CPU0:XRv-LAB(config)#end
RP/0/0/CPU0:XRv-LAB#crypto key generate rsa ?
WORD RSA keypair label
general-keys Generate a general purpose RSA key pair for signing and encrypti
on
usage-keys Generate seperate RSA key pairs for signing and encryption
<cr>
RP/0/0/CPU0:XRv-LAB#crypto key generate rsa
Thu Mar 5 11:07:59.308 UTC
The name for the keys will be: the_default
Choose the size of the key modulus in the range of 512 to 2048 for your General Purpose Keypair. Choosing a key modulus greater than 512 may take a few minutes.
How many bits in the modulus [1024]: 2048
Generating RSA keys ...
Done w/ crypto generate keypair
[OK]
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 11:08:19.166 UTC
RP/0/0/CPU0:XRv-LAB(config)#ssh ?
client Provide SSH client service
server Provide SSH server service
timeout Set timeout value for SSH
RP/0/0/CPU0:XRv-LAB(config)#ssh server ?
dscp Cisco ssh server DSCP
ipv4 IPv4 access list for ssh server
ipv6 IPv6 access list for ssh server
logging Enable ssh server logging
rate-limit Cisco sshd rate-limit of service requests
session-limit Cisco sshd session-limit of service requests
v2 Cisco sshd force protocol version 2 only
vrf Cisco sshd VRF name
<cr>
RP/0/0/CPU0:XRv-LAB(config)#ssh server v2
RP/0/0/CPU0:XRv-LAB(config)#commit
Thu Mar 5 11:08:35.795 UTC
RP/0/0/CPU0:XRv-LAB(config)#control-plane
RP/0/0/CPU0:XRv-LAB(config-ctrl)#?
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
management-plane Configure management plane protection
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-ctrl)#management-plane ?
inband Configure an inband interface/protocol
out-of-band Configure an out-of-band interface/protocol
<cr>
RP/0/0/CPU0:XRv-LAB(config-ctrl)# management-plane out-of-band
RP/0/0/CPU0:XRv-LAB(config-mpp-outband)#?
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
interface Configure an outband interface
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
vrf configure mpp outband vrf
RP/0/0/CPU0:XRv-LAB(config-mpp-outband)#interface MgmtEth0/0/CPU0/0
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#?
allow Allow a protocol on this interface
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow ?
HTTP HTTP(S)
SNMP SNMP (all versions)
SSH Secure Shell (v1 & v2)
TFTP TFTP
Telnet Telnet
XML XML
all All Protocols
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow telnet ?
peer Configure peer address on this interface
<cr>
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow telnet peer
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#?
address Configure peer address on this interface
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ?
ipv4 Configure peer IPv4 address on this interface
ipv6 Configure peer IPv6 address on this interface
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ipv4 ?
A.B.C.D Enter IPv4 address
A.B.C.D/length Enter IPv4 address with prefix
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ipv4 192.168.1.0/24
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#allow ssh peer
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#address ipv4 192.168.1.0/24
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#commit
Thu Mar 5 11:17:29.289 UTC
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#do who
Thu Mar 5 11:26:11.743 UTC
Line User Service Conns Idle Location
* con0/0/CPU0 cisco hardware 0 00:00:00
vty0 cisco ssh 0 00:00:07 192.168.1.100
vty1 telnet 0 00:00:04 192.168.1.100
To reach remote networks, you need a static default route:
I downloaded an IOS-XRv demo OVA file and import in VMware Workstation. To import, go to File > Open > rename the virtual machine > Import.
Edit
the virtual machine settings. I gave the VM a 3 GB memory.
The OVA demo file had two Network Adapters, so I set the first Network Adapter as Custom: VMnet0 (192.168.1.0/24 subnet in my lab) > removed the second Network Adapter > click OK > Power on this virtual machine.
Just click Yes to continue.
You'll see a Booting 'IOS XRv' output during initial bootup. You'll need to increase the memory (RAM) and Hard Disk space on the VM in order to properly bootup.
I increased the Hard Disk to 80 GB and added a Serial Port in order to monitor the bootup process via the console.
You'll see a blank prompt which indicated the VM has completed its bootup.
You'll need to install Named Pipe TCP Proxy to view the console output.
Click the connector icon > type the Pipe name: \\.\pipe\xr1 > type a Port number (you can use any abritrary number) > click Add.
Open a terminal emulator (I used SecureCRT in this case) > choose Telnet > type the IP address: 127.0.0.1 (loopback IP). You'll be initially asked to create a root-system username (aside from the system default: cisco/cisco).
Below are some basic configuration in order to remotely access the IOS-XRv and eventually eliminate the use of Named Pipe Proxy.
ios con0/0/CPU0 is now available
Press RETURN to get started.
IMPORTANT: READ CAREFULLY
Welcome to the Demo Version of Cisco IOS XRv (the "Software").
The Software is subject to and governed by the terms and conditions
of the End User License Agreement and the Supplemental End User
License Agreement accompanying the product, made available at the
time of your order, or posted on the Cisco website at
www.cisco.com/go/terms (collectively, the "Agreement").
As set forth more fully in the Agreement, use of the Software is
strictly limited to internal use in a non-production environment
solely for demonstration and evaluation purposes. Downloading,
installing, or using the Software constitutes acceptance of the
Agreement, and you are binding yourself and the business entity
that you represent to the Agreement. If you do not agree to all
of the terms of the Agreement, then Cisco is unwilling to license
the Software to you and (a) you may not download, install or use the
Software, and (b) you may return the Software as more fully set forth
in the Agreement.
Please login with any configured user/password, or cisco/cisco
User Access Verification
Username: cisco
Password:<cisco>
RP/0/0/CPU0:ios#configure terminal
Thu Mar 5 10:36:57.885 UTC
RP/0/0/CPU0:ios(config)#hostname XRv-LAB // DEFAULT HOSTNAME IS 'ios'
RP/0/0/CPU0:ios(config)#
RP/0/0/CPU0:ios(config)#show config // VIEW TARGET CONFIG
Thu Mar 5 10:37:21.293 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
hostname XRv-LAB
end
RP/0/0/CPU0:ios(config)#
RP/0/0/CPU0:ios(config)#commit // APPLY CHANGE IN RUNNING CONFIG; THERE'S NO write memory IN IOS-XR
Thu Mar 5 10:37:26.873 UTC
RP/0/0/CPU0:Mar 5 10:37:26.913 : ike[228]: %SECURITY-IKE-4-WARNING : You may want to configure a domain-name
RP/0/0/CPU0:XRv-LAB(config)#load ?
WORD Load from file
bootflash: Load from bootflash: file system
commit Load commit changes
configuration Contents of configuration
diff Load from diff file
disk0: Load from disk0: file system
disk0a: Load from disk0a: file system
disk1: Load from disk1: file system
disk1a: Load from disk1a: file system
ftp: Load from ftp: file system
nvram: Load from nvram: file system
rcp: Load from rcp: file system
rollback Load rollback changes
tftp: Load from tftp: file system
RP/0/0/CPU0:XRv-LAB(config)#load rollback ?
changes Load configuration changes to be made during a rollback operation
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes ?
last Changes for rolling back last <n> commits
to Changes up to (and including) a specific commit
1000000039 Commit ID
1000000038 Commit ID
1000000037 Commit ID
1000000036 Commit ID
1000000035 Commit ID
1000000034 Commit ID
1000000033 Commit ID
1000000032 Commit ID
1000000031 Commit ID
1000000030 Commit ID
1000000029 Commit ID
1000000028 Commit ID
1000000027 Commit ID
1000000026 Commit ID
1000000025 Commit ID
1000000024 Commit ID
1000000023 Commit ID
1000000022 Commit ID
1000000021 Commit ID
1000000020 Commit ID
1000000019 Commit ID
1000000018 Commit ID
1000000017 Commit ID
1000000016 Commit ID
1000000015 Commit ID
1000000014 Commit ID
1000000013 Commit ID
1000000012 Commit ID
1000000011 Commit ID
1000000010 Commit ID
1000000009 Commit ID
1000000008 Commit ID
1000000007 Commit ID
1000000006 Commit ID
1000000005 Commit ID
1000000004 Commit ID
1000000003 Commit ID
1000000002 Commit ID
1000000001 Commit ID
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes last ?
<1-39> Number of commits
RP/0/0/CPU0:XRv-LAB(config)#load rollback changes last 1 // ROLLBACK TO PREVIOUS RUNNING CONFIG
Building configuration...
Loading.
48 bytes parsed in 1 sec (47)bytes/sec
RP/0/0/CPU0:ios(config)# // HOSTNAME ROLLBACK TO ios
RP/0/0/CPU0:ios(config)#hostname XRv-LAB
RP/0/0/CPU0:ios(config)#commit
Thu Mar 5 10:38:10.427 UTC
RP/0/0/CPU0:XRv-LAB(config)#
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#show config
Thu Mar 5 10:39:16.466 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
end
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#clear // REMOVE TARGET CONFIG; OR JUST SIMPLY TYPE THE abort COMMAND
RP/0/0/CPU0:XRv-LAB(config)#
RP/0/0/CPU0:XRv-LAB(config)#show config
Thu Mar 5 10:39:30.625 UTC
Building configuration...
!! IOS XR Configuration 5.1.2
end
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#commit ?
best-effort Commit the configuration changes via best-effort operation
comment Assign a comment to this commit
confirmed Rollback this commit unless there is a confirming commit
force Override the memory checks
label Assign a label to this commit
replace Replace the contents of running configuration
save-running Save running configuration to a file
<cr> Commit the configuration changes to running
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed ?
<30-65535> Seconds until rollback unless there is a confirming commit
minutes Specify the rollback timer in the minutes
<cr> Commit the configuration changes to running
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed 30 // ROLLBACK CONFIG AFTER 30 SECONDS
Thu Mar 5 10:41:34.646 UTC
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:41:56.645 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
<AFTER 30 SECONDS>
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:42:23.353 UTC
Interface not found (Loopback0)
RP/0/0/CPU0:XRv-LAB(config-if)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 1.1.1.1 255.255.255.255
RP/0/0/CPU0:XRv-LAB(config-if)#commit confirmed 30
Thu Mar 5 10:45:24.980 UTC
One or more commits have occurred from other
configuration sessions since this session started
or since the last commit was made from this session.
You can use the 'show configuration commit changes'
command to browse the changes.
Do you wish to proceed with this commit anyway? [no]: yes
RP/0/0/CPU0:XRv-LAB(config-if)#do show interface loopback0
Thu Mar 5 10:45:52.088 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#commit // APPLY CHANGES IN RUNNING CONFIG
Thu Mar 5 10:45:56.038 UTC
% Confirming commit for trial session.
RP/0/0/CPU0:XRv-LAB(config-if)#end
RP/0/0/CPU0:XRv-LAB#show interface loopback0
Thu Mar 5 10:46:17.087 UTC
Loopback0 is up, line protocol is up
Interface state transitions: 1
Hardware is Loopback interface(s)
Internet address is 1.1.1.1/32
MTU 1500 bytes, BW 0 Kbit
reliability Unknown, txload Unknown, rxload Unknown
Encapsulation Loopback, loopback not set,
Last input Unknown, output Unknown
Last clearing of "show interface" counters Unknown
Input/output data rate is disabled.
RP/0/0/CPU0:XRv-LAB#show ip interface brief
Thu Mar 5 10:49:37.063 UTC
Interface IP-Address Status Protocol
Loopback0 1.1.1.1 Up Up
MgmtEth0/0/CPU0/0 unassigned Shutdown Down
RP/0/0/CPU0:XRv-LAB#configure terminal
RP/0/0/CPU0:XRv-LAB(config)#interface loopback0
RP/0/0/CPU0:XRv-LAB(config-if)#description ### TEST ###
RP/0/0/CPU0:XRv-LAB(config-if)#
RP/0/0/CPU0:XRv-LAB(config-if)#show config merge interface loopback0 // DISPLAY MERGED TARGET AND RUNNING CONFIG
Mon Mar 23 09:00:21.784 UTC
interface Loopback0
description ### TEST ###
ipv4 address 1.1.1.1 255.255.255.255
!
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 10:50:49.668 UTC
RP/0/0/CPU0:XRv-LAB(config)#interface ?
BVI Bridge-Group Virtual Interface
Bundle-Ether Aggregated Ethernet interface(s)
Bundle-POS Aggregated POS interface(s)
CEM Circuit Emulation interface(s)
GigabitEthernet GigabitEthernet/IEEE 802.3 interface(s)
IMA ATM Network Interface(s)
InterflexLeft InterFlex Left interface(s)
InterflexRight InterFlex Right interface(s)
Loopback Loopback interface(s)
MgmtEth Ethernet/IEEE 802.3 interface(s)
Multilink Multilink network interface(s)
Null Null interface
POS Packet over SONET/SDH network interface(s)
PW-Ether PWHE Ethernet Interface
PW-IW PWHE VC11 IP Interworking Interface
Serial Serial network interface(s)
preconfigure Specify a preconfig
tunnel-ip GRE/IPinIP Tunnel Interface(s)
tunnel-ipsec IPSec Tunnel interface(s)
tunnel-mte MPLS Traffic Engineering P2MP Tunnel interface(s)
tunnel-te MPLS Traffic Engineering Tunnel interface(s)
tunnel-tp MPLS Transport Protocol Tunnel interface
RP/0/0/CPU0:XRv-LAB(config)#interface MgmtEth0/0/CPU0/0
RP/0/0/CPU0:XRv-LAB(config-if)#ip address 192.168.1.150 255.255.255.0
RP/0/0/CPU0:XRv-LAB(config-if)#no shutdown
RP/0/0/CPU0:XRv-LAB(config-if)#commit
Thu Mar 5 10:51:59.353 UTC
RP/0/0/CPU0:Mar 5 10:51:59.403 : ifmgr[226]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/0/CPU0/0, changed state to Down
RP/0/0/CPU0:XRv-LAB(config-if)#RP/0/0/CPU0:Mar 5 10:51:59.433 : ifmgr[226]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/0/CPU0/0, changed state to Up
RP/0/0/CPU0:XRv-LAB(config-if)#do ping 192.168.1.1
Thu Mar 5 10:52:08.803 UTC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/14/59 ms
C:\Users\User>ping 192.168.1.150 // PING FROM SOURCE IP 192.168.1.100 (WINDOWS 10)
Pinging 192.168.1.150 with 32 bytes of data:
Reply from 192.168.1.150: bytes=32 time=1ms TTL=255
Reply from 192.168.1.150: bytes=32 time=1ms TTL=255
Ping statistics for 192.168.1.150:
Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
Control-C
^C
C:\Users\User>telnet 192.168.1.150
Connecting To 192.168.1.150...Could not open connection to the host, on port 23: Connect failed
You'll need to explicitly configure the remote access (Telnet or SSH) under the control-plane.
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 11:04:45.601 UTC
RP/0/0/CPU0:XRv-LAB(config)#telnet ?
ipv4 IPv4 configuration
ipv6 IPv6 configuration
vrf VRF name for telnet server
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 ?
client Telnet client configuration commands
dscp dscp
server Telnet server configuration commands
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server ?
max-servers Set number of allowable telnet sessions
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server max-servers ?
<1-100> Set number of allowable telnet sessions
RP/0/0/CPU0:XRv-LAB(config)#telnet ipv4 server max-servers 3
RP/0/0/CPU0:XRv-LAB(config)#domain name ?
WORD Default domain name
RP/0/0/CPU0:XRv-LAB(config)#domain name lab.com
RP/0/0/CPU0:XRv-LAB(config)#commit
Thu Mar 5 11:07:00.782 UTC
RP/0/0/CPU0:XRv-LAB(config)#end
RP/0/0/CPU0:XRv-LAB#crypto key generate rsa ?
WORD RSA keypair label
general-keys Generate a general purpose RSA key pair for signing and encrypti
on
usage-keys Generate seperate RSA key pairs for signing and encryption
<cr>
RP/0/0/CPU0:XRv-LAB#crypto key generate rsa
Thu Mar 5 11:07:59.308 UTC
The name for the keys will be: the_default
Choose the size of the key modulus in the range of 512 to 2048 for your General Purpose Keypair. Choosing a key modulus greater than 512 may take a few minutes.
How many bits in the modulus [1024]: 2048
Generating RSA keys ...
Done w/ crypto generate keypair
[OK]
RP/0/0/CPU0:XRv-LAB#configure terminal
Thu Mar 5 11:08:19.166 UTC
RP/0/0/CPU0:XRv-LAB(config)#ssh ?
client Provide SSH client service
server Provide SSH server service
timeout Set timeout value for SSH
RP/0/0/CPU0:XRv-LAB(config)#ssh server ?
dscp Cisco ssh server DSCP
ipv4 IPv4 access list for ssh server
ipv6 IPv6 access list for ssh server
logging Enable ssh server logging
rate-limit Cisco sshd rate-limit of service requests
session-limit Cisco sshd session-limit of service requests
v2 Cisco sshd force protocol version 2 only
vrf Cisco sshd VRF name
<cr>
RP/0/0/CPU0:XRv-LAB(config)#ssh server v2
RP/0/0/CPU0:XRv-LAB(config)#commit
Thu Mar 5 11:08:35.795 UTC
RP/0/0/CPU0:XRv-LAB(config)#control-plane
RP/0/0/CPU0:XRv-LAB(config-ctrl)#?
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
management-plane Configure management plane protection
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-ctrl)#management-plane ?
inband Configure an inband interface/protocol
out-of-band Configure an out-of-band interface/protocol
<cr>
RP/0/0/CPU0:XRv-LAB(config-ctrl)# management-plane out-of-band
RP/0/0/CPU0:XRv-LAB(config-mpp-outband)#?
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
interface Configure an outband interface
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
vrf configure mpp outband vrf
RP/0/0/CPU0:XRv-LAB(config-mpp-outband)#interface MgmtEth0/0/CPU0/0
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#?
allow Allow a protocol on this interface
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow ?
HTTP HTTP(S)
SNMP SNMP (all versions)
SSH Secure Shell (v1 & v2)
TFTP TFTP
Telnet Telnet
XML XML
all All Protocols
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow telnet ?
peer Configure peer address on this interface
<cr>
RP/0/0/CPU0:XRv-LAB(config-mpp-outband-if)#allow telnet peer
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#?
address Configure peer address on this interface
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted configuration
commit Commit the configuration changes to running
describe Describe a command without taking real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a group
exclude-item Negate a command or set its defaults
exit Exit from this submode
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ?
ipv4 Configure peer IPv4 address on this interface
ipv6 Configure peer IPv6 address on this interface
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ipv4 ?
A.B.C.D Enter IPv4 address
A.B.C.D/length Enter IPv4 address with prefix
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#address ipv4 192.168.1.0/24
RP/0/0/CPU0:XRv-LAB(config-telnet-peer)#allow ssh peer
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#address ipv4 192.168.1.0/24
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#commit
Thu Mar 5 11:17:29.289 UTC
RP/0/0/CPU0:XRv-LAB(config-ssh-peer)#do who
Thu Mar 5 11:26:11.743 UTC
Line User Service Conns Idle Location
* con0/0/CPU0 cisco hardware 0 00:00:00
vty0 cisco ssh 0 00:00:07 192.168.1.100
vty1 telnet 0 00:00:04 192.168.1.100
To reach remote networks, you need a static default route:
RP/0/0/CPU0:XRv-LAB(config)#router
?
amt
Automatic Multicast Tunneling (AMT)
bgp
BGP configuration subcommands
eigrp
EIGRP configuration subcommands
hsrp
HSRP configuration subcommands
igmp
IPv4 Address Family
isis
ISO IS-IS
lisp
LISP configuration subcommands
mld
IPv6 address family
msdp
MSDP configuration subcommands
ospf
OSPF configuration subcommands
ospfv3
IPv6 Open Shortest Path First protocol (OSPFv3)
pim
PIM configuration subcommands
rib
RIB configuration subcommands
rip
RIP configuration subcommands
static
Static route configuration subcommands
vrrp
VRRP configuration subcommands
RP/0/0/CPU0:XRv-LAB(config)#router
static
RP/0/0/CPU0:XRv-LAB(config-static)#?
address-family Static route address family configuration
subcommands
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted
configuration
commit Commit the configuration changes
to running
describe Describe a command without taking
real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a
group
exclude-item Negate a command or set its defaults
exit Exit from this submode
maximum Limit the number of static paths
which may be configured
no Negate a command or set its
defaults
pwd Commands used to reach current
submode
root Exit to the global
configuration mode
show Show contents of configuration
vrf VRF Static route configuration
subcommands
RP/0/0/CPU0:XRv-LAB(config-static)#address-family
?
ipv4
IPv4 commands
ipv6
IPv6 commands
RP/0/0/CPU0:XRv-LAB(config-static)#address-family
ipv4 ?
multicast
Multicast commands
unicast
Unicast commands
RP/0/0/CPU0:XRv-LAB(config-static)#address-family
ipv4 unicast
RP/0/0/CPU0:XRv-LAB(config-static-afi)#?
A.B.C.D/length Destination prefix
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
clear Clear the uncommitted
configuration
commit Commit the configuration changes
to running
describe Describe a command without taking
real actions
do Run an exec command
exclude-group Exclude apply-group configuration from a
group
exclude-item Negate a command or set its defaults
exit Exit from this submode
no Negate a command or set its
defaults
pwd Commands used to reach current
submode
root Exit to the global
configuration mode
show Show contents of configuration
topology Topology static route configuration
subcommands
RP/0/0/CPU0:XRv-LAB(config-static-afi)#0.0.0.0/0
?
A.B.C.D Forwarding router's address
BVI Bridge-Group Virtual Interface
Bundle-Ether Aggregated Ethernet interface(s)
Bundle-POS Aggregated POS interface(s)
CEM Circuit Emulation interface(s)
FastEthernet FastEthernet/IEEE 802.3 interface(s)
FortyGigE FortyGigabitEthernet/IEEE 802.3
interface(s)
GigabitEthernet GigabitEthernet/IEEE 802.3 interface(s)
HundredGigE HundredGigabitEthernet/IEEE 802.3
interface(s)
IMA ATM Network Interface(s)
InterflexLeft InterFlex Left interface(s)
InterflexRight InterFlex Right interface(s)
Loopback Loopback interface(s)
MgmtEth Ethernet/IEEE 802.3 interface(s)
Multilink Multilink network interface(s)
Null Null interface
POS Packet over SONET/SDH network
interface(s)
PW-Ether PWHE Ethernet Interface
PW-IW PWHE VC11 IP Interworking Interface
SRP SRP interface(s)
Serial Serial network interface(s)
TenGigE TenGigabitEthernet/IEEE 802.3
interface(s)
tunnel-ip GRE/IPinIP Tunnel Interface(s)
tunnel-ipsec IPSec Tunnel interface(s)
tunnel-te MPLS Traffic Engineering Tunnel
interface(s)
tunnel-tp MPLS Transport Protocol Tunnel
interface
vrf Destination VRF
RP/0/0/CPU0:XRv-LAB(config-static-afi)#0.0.0.0/0
192.168.1.1
RP/0/0/CPU0:XRv-LAB(config-static-afi)#commit
