Sunday, September 1, 2024

Cisco ASR920 License Install (non Smart License)

I had to RMA a Cisco ASR920 router due to a faulty port and unable to detect the inserted SFP. I also requested the Cisco TAC License team to generate a new license file (Traditional/PAK license) based on the feature licenses on the previous ASR920 (bundled in a single license). You'll need to use the new chassis serial number to generate the new PAK license. 

The RMA ASR920 came with the default IOS-XE version 16.9.3, so it's easy for to upgrade to any 16.x code. I had a previous post regarding the IOS-XE upgrade in a Cisco ASR920. The RMA also doesn't come with new hot-swappable power supply unit (PSU) so you had to swap out the PSU from the old to new ASR920.


RMA_ASR920#copy tftp://172.27.5.3/CAT24071234_20240621080644.lic bootflash:

Destination filename [CAT24071234_20240621080644.lic]?

Accessing tftp://172.27.5.3/CAT24071234_20240621080644.lic...

Loading CAT24071234_20240621080644.lic from 172.27.5.3 (via GigabitEthernet0): !

[OK - 3326 bytes]

 

3326 bytes copied in 22.088 secs (151 bytes/sec)

 

 

RMA_ASR920#dir

Directory of bootflash:/

 

   11  drwx            16384   Jul 1 2020 01:41:57 +00:00  lost+found

46273  drwx             4096   Jul 1 2020 01:42:01 +00:00  .prst_sync

   12  -rw-        445862301   Jul 1 2020 01:57:10 +00:00  asr920-universalk9_npe.16.09.03.SPA.bin

23137  drwx            20480  Jun 21 2024 19:00:37 +00:00  tracelogs

 7713  drwx             4096  Jun 21 2024 16:43:44 +00:00  .installer

 

<OUTPUT TRUNCATED>


   16  -rw-             3326  Jun 21 2024 19:04:11 +00:00  CAT24071234_20240621080644.lic

 

1241329664 bytes total (253034496 bytes free)

 

 

RMA_ASR920#license install bootflash:CAT24071234_20240621080644.lic

Installing licenses from "bootflash:CAT24071234_20240621080644.lic

Installing...Feature:24portGE-4port10GE...Successful:Supported

Installing...Feature:advancedmetroipaccess...Successful:Supported

Installing...Feature:metroaccess...Failed:

% Error: Duplicate license

2/3 licenses were successfully installed

1/3 licenses were existing licenses

0/3 licenses were failed to install

 

 

I noticed the installed and my target advancedmetroipaccess License State was Active, Not in Use.

 

RMA_ASR920#show license

Index 1 Feature: advancedmetroipaccess         

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

Index 2 Feature: metroipaccess                 

        Period left: Not Activated

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 3 Feature: metroaccess                   

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 4 Feature: atm                           

Index 5 Feature: oc3                           

Index 6 Feature: oc12                          

Index 7 Feature: 1588                          

Index 8 Feature: 10GEupgradelicense            

Index 9 Feature: 24portGE-4port10GE            

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 10 Feature: 12x1GEupgradelicense          

 

 

RMA_ASR920#show license all

License Store: Primary License Storage

StoreIndex: 1   Feature: metroaccess                       Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

StoreIndex: 2   Feature: 24portGE-4port10GE                Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

StoreIndex: 3   Feature: advancedmetroipaccess             Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Built-In License Storage

StoreIndex: 0   Feature: advancedmetroipaccess             Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

StoreIndex: 1   Feature: metroipaccess                     Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

StoreIndex: 2   Feature: metroaccess                       Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second 

        License Count: Non-Counted

        License Priority: None

 

Per the Cisco link, I had to configure the license boot level and perform a reload command to take effect.

RMA_ASR920#show run | i license boot

license boot level metroaccess


RMA_ASR920#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

RMA_ASR920(config)#license ?

  accept   Accept all further License Agreements

  agent    Configure LIC_AGENT

  boot     license boot config commands

  feature  License features

  smart    Smart licensing

  udi      license udi

 

RMA_ASR920(config)#license boot ?

  level  which level to boot

 

RMA_ASR920(config)#license boot level ?

  advancedmetroipaccess  Advanced Metro IP Access License Level

  metroaccess            Metro Access License Level

  metroipaccess          Metro IP Access License Level

 

RMA_ASR920(config)#license boot level advancedmetroipaccess ?

  <cr>  <cr>

 

RMA_ASR920(config)#license boot level advancedmetroipaccess

% use 'write' command to make license boot config take effect on next boot

 

RMA_ASR920(config)#end

RMA_ASR920#write memory

Building configuration...

[OK]

 

RMA_ASR920#show run | i license boot

license boot level advancedmetroipaccess

 

 

RMA_ASR920#show license all

License Store: Primary License Storage

StoreIndex: 1   Feature: metroaccess                       Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

StoreIndex: 2   Feature: 24portGE-4port10GE                Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

StoreIndex: 3   Feature: advancedmetroipaccess             Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

 

 

RMA_ASR920#show version

Cisco IOS XE Software, Version 16.x.x

Cisco IOS Software [Gibraltar], ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 16.x.x, RELEASE SOFTWARE (fc5)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2020 by Cisco Systems, Inc.

Compiled Thu 09-Jul-20 17:13 by mcpre

 

 

Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.

All rights reserved.  Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.  The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.  For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

 

 

ROM: IOS-XE ROMMON

 

RMA_ASR920 uptime is 23 hours, 12 minutes

Uptime for this control processor is 23 hours, 17 minutes

System returned to ROM by reload

System image file is "bootflash:asr920-universalk9_npe.16.x.x.SPA.bin"

Last reload reason: Reload Command

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

License Level: metroaccess

License Type: Permanent

Next reload license Level: advancedmetroipaccess

 

 

Smart Licensing Status: Smart Licensing is DISABLED

 

cisco ASR-920-x-x (Freescale P2020) processor (revision 1.2 GHz) with 890398K/6147K bytes of memory.

Processor board ID CAT24071234

24 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

32768K bytes of non-volatile configuration memory.

3670016K bytes of physical memory.

1231647K bytes of eMMC flash at bootflash:.

 

Configuration register is 0x2102

 

 

RMA_ASR920#reload

Proceed with reload? [confirm]

 

 

Notice the advancemetroipaccess License State was changed to Active, In Use after a reload.

 

RMA_ASR920#show license

Index 1 Feature: advancedmetroipaccess         

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 2 Feature: metroipaccess                 

        Period left: Not Activated

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 3 Feature: metroaccess                   

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium