3560#
00:01:47: %ILPOWER-7-DETECT: Interface Fa0/8: Power Device detected: IEEE PD3560#show power inline
Available:124.0(w) Used:15.4(w) Remaining:108.6(w)Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa0/1 auto off 0.0 n/a n/a 15.4
Fa0/2 auto off 0.0 n/a n/a 15.4
Fa0/3 auto off 0.0 n/a n/a 15.4
Fa0/4 auto off 0.0 n/a n/a 15.4
Fa0/5 auto off 0.0 n/a n/a 15.4
Fa0/6 auto off 0.0 n/a n/a 15.4
Fa0/7 auto off 0.0 n/a n/a 15.4
Fa0/8 auto on 15.4 WS-C2960PD-8TT-L 3 15.4
We connect our PC's Ethernet LAN to a switch port, drag a cloud icon in GNS3 workspace > Right-click > Configure > NIO Ethernet > Select the Local Area Connection adapter and then click OK.
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface fastethernet1/1
R1(config-if)#no shutdown
R1(config-if)#switchport ?
access Set access mode characteristics of the interface
mode Set trunking mode of the interface
priority Set 802.1p priorities
trunk Set trunking characteristics of the interface
voice Voice appliance attributes
<cr>
R1(config-if)#switchport trunk ?
allowed Set allowed VLAN characteristics when interface is in trunking
mode
encapsulation Set trunking encapsulation when interface is in trunking mode
native Set trunking native characteristics when interface is in
trunking mode
R1(config-if)#switchport trunk encapsulation ?
dot1q Interface uses only 802.1q trunking encapsulation when trunking
R1(config-if)#switchport trunk encapsulation dot1q
R1(config-if)#switchport mode ?
access Set trunking mode to ACCESS unconditionally
trunk Set trunking mode to TRUNK unconditionally
R1(config-if)#switchport mode trunk
R1(config-if)#
*Mar 1 00:01:09.191: %DTP-5-TRUNKPORTON: Port Fa1/1 has become dot1q trunk
R1(config-if)#end
*Mar 1 00:02:24.203: %SYS-5-CONFIG_I: Configured from console by console
R1#show interface trunk
Port Mode Encapsulation Status Native vlan
Fa1/1 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa1/1 1-4094
Port Vlans allowed and active in management domain
Fa1/1 1
Port Vlans in spanning tree forwarding state and not pruned
Fa1/1 1
R1#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Local Intrfce Holdtme Capability Platform Port ID
SW1 Fas 1/1 136 S I WS-C2960P Fas 0/8
----
SW1#configure terminal
SW1(config)#interface fastethernet0/8
SW1(config-if)#switchport mode ?
access Set trunking mode to ACCESS unconditionally
dynamic Set trunking mode to dynamically negotiate access or trunk mode
trunk Set trunking mode to TRUNK unconditionally
SW1(config-if)#switchport mode trunk
SW1(config-if)#
*Mar 1 00:51:39.850: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down
*Mar 1 00:51:39.850: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
SW1(config-if)#
*Mar 1 00:51:42.870: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up
SW1#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
R1.lab.local Fas 0/8 138 R S I 3725 Fas 1/1
SW1(config)#vlan 10
SW1(config-vlan)#name SALES
SW1(config-vlan)#exit
SW1(config)#vlan 20
SW1(config-vlan)#name IT
SW1(config-vlan)#exit
SW1(config)#vtp domain CISCO
Changing VTP domain name from NULL to CISCO
SW1(config)#
*Mar 1 01:07:20.775: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to CISCO.
SW1(config)#vtp password CISCO
Setting device VLAN database password to CISCO
SW1(config)#end
*Mar 1 01:03:39.073: %SYS-5-CONFIG_I: Configured from console by console
SW1#show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Gi0/1
10 SALES active
20 IT active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
SW1#show vtp status
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 4
Maximum VLANs supported locally : 255
Number of existing VLANs : 7
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x58 0x1E 0x86 0x6A 0xAF 0x01 0xEE 0x54
Configuration last modified by 0.0.0.0 at 3-1-93 01:03:30
Local updater ID is 0.0.0.0 (no valid interface found)
R1(config)#vtp mode ?
client Set the device to client mode.
server Set the device to server mode.
transparent Set the device to transparent mode.
R1(config)#vtp mode client
Setting device to VTP CLIENT mode.
R1(config)#exit
R1#show vlan-switch
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa1/0, Fa1/2, Fa1/3, Fa1/4
Fa1/5, Fa1/6, Fa1/7, Fa1/8
Fa1/9, Fa1/10, Fa1/11, Fa1/12
Fa1/13, Fa1/14, Fa1/15
10 SALES active
20 IT active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
1002 fddi 101002 1500 - 0 - - - 0 0
1003 tr 101003 1500 - 0 - - srb 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
R1#show vtp status
VTP Version : 2
Configuration Revision : 4
Maximum VLANs supported locally : 36
Number of existing VLANs : 7
VTP Operating Mode : Client
VTP Domain Name : CISCO
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x71 0x09 0x94 0x78 0x7F 0xDF 0xB1 0x27
Configuration last modified by 0.0.0.0 at 3-1-93 01:03:30
