The Cisco ASR 920 router has dual power supply, gigabit and ten gigabit SFP ports.
It has a modular fan tray at the back of the chassis.
The serial number sticker is found on top of the chassis.
Refer to this link for connecting the ASR 920 USB console cable. The Cisco ASR920 uses a USB console cable which is included in the box. There are a total of 4 USB ports on the ASR 920 front panel. You insert the USB console cable on the lower right USB port labeled: USB CONSOLE), which is under USB MEM slot. The other USB end goes to your PC USB port. You need to install the appropriate USB driver on your PC.
These are the USB-to-RJ45 serial console kit (920-CONS-KIT-S), which is used for console out-of-band server. This cable adapter uses the lower left USB port labeled: CONSOLE, which is under the MGMT port and near the Cisco logo.
You can insert a compatible USB key on the upper right USB port in order to transfer files such as the IOS-XE software.
Notice the LED lights on ports (G0/0/12-23) and Te0/0/24-27 are off (shutdown). You'll need a L-ASR920-1G-12 license in order to activate them.
For the USB console driver, double-click installer .exe file and follow the installation wizard.
Open HyperTerminal and create a new connection.
HyperTerminal will auto detect the COM port to be used.
Click Restore Defaults.
Once you know which COM to use, you can now open your favorite terminal emulator such as PuTTY, TeraTerm or SecureCRT. These are the settings I used in SecureCRT.
Below is the initial bootup and upgrade process for the Cisco ASR 920 router.
UEA platform with 3670016 Kbytes of main memory
no valid BOOT image found
Final autoboot attempt from default boot device...
Warning: filesystem is not clean
Warning: filesystem is not clean
Located asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin
Image size 333554684 inode num 12, bks cnt 81435 blk size 8*512
##################################################################################
##################################################################################
Boot image size = 333554684 (0x13e1a3fc) bytes
pid_str[ASR-920-24SZ-M]
ROM:RSA Self Test hash Mismatch in long long word No. 0
ROM:Sha512 Self Test
Package header rev 2 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated a3b0b3bc:8880efd3:2305ad5c:7c3ce271:d46331e3
expected a3b0b3bc:8880efd3:2305ad5c:7c3ce271:d46331e3
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
Passing control to the main image..
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 5 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 8 contained errors which were auto-corrected.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Tmpdisk creation successful, status = 0
flashfs[16]: 0 files, 1 directories
flashfs[16]: 0 orphaned files, 0 orphaned directories
flashfs[16]: Total bytes: 1935360
flashfs[16]: Bytes used: 1024
flashfs[16]: Bytes available: 1934336
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
registering for ASR ONLY!!!cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 900304K/6147K bytes of memory.
Processor board ID CAT2204ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
Press RETURN to get started!
*Mar 7 18:27:55.219: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Mar 7 18:27:57.249: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = ASR-920-24SZ-M Next reboot level = advancedmetroipaccess and License = advancedmetroipaccess
*Mar 7 18:28:19.237: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot Get the number of ports in MAC notification
*Mar 7 18:28:22.156: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Mar 7 18:28:22.157: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Mar 7 18:28:22.157: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed state to up
*Mar 7 18:28:22.158: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 7 18:28:22.176: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Mar 7 18:28:22.353: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Aborted by non-PnP bootstrapping)
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, changed state to up
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, changed state to up
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 7 18:28:22.950: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, changed state to up
*Mar 7 18:28:23.205: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-intf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Mar 7 18:28:27.081: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 7 18:28:27.095: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled
*Mar 7 18:28:27.129: %SPA_OIR-6-OFFLINECARD: SPA (24xGE-4x10GE-FIXED-S) offline in subslot 0/0
*Mar 7 18:28:27.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
*Mar 7 18:28:29.767: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Mar 7 18:28:29.767: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Mar 7 18:28:29.768: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Mar 7 18:28:29.768: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Mar 7 18:28:29.852: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/0
Authentication passed
Router>enable
Router#
*Mar 7 18:29:41.269: %SPA_OIR-6-ONLINECARD: SPA (24xGE-4x10GE-FIXED-S) online in subslot 0/0
*Mar 7 18:29:41.270: %LICENSE-1-REQUEST_FAILED: License request for feature 24portGE-4port10GE 1.0 failed. UDI=ASR-920-24SZ-M:CAT2204ABCD
*Mar 7 18:29:42.817: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to down
*Mar 7 18:29:43.033: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to down
*Mar 7 18:29:43.034: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to down
*Mar 7 18:29:43.233: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/3, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/4, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/5, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/6, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/7, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/8, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/9, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/10, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/11, changed state to down
Router#
*Mar 7 18:29:47.199: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.986726] scsi 0:0:0:0: Direct-Access Imation Nano 1.20 PQ: 0 ANSI: 2
*Mar 7 18:29:47.204: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.990877] sd 0:0:0:0: Attached scsi generic sg0 type 0
*Mar 7 18:29:47.204: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.991327] sd 0:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
*Mar 7 18:29:47.525: %IOSXE-5-PLATFORM: R0/0: kernel: [ 280.313878] sd 0:0:0:0: [sda] Attached SCSI removable disk
Router#[OK]
Router#dir usb0:
Directory of usb0:/
<OUTPUT TRUNCATED>
124 -rwx 73635840 Aug 14 2017 10:51:06 +00:00 asa944-5-smp-k8.bin
125 drwx 32768 Feb 5 2018 10:27:50 +00:00 Anyconnect 3.1
126 -rwx 104970520 Feb 5 2018 15:53:40 +00:00 c3900-universalk9-mz.SPA.154-3.M6a.bin
127 -rwx 490064992 Feb 5 2018 15:53:10 +00:00 asr1001x-universalk9.03.13.05.S.154-3.S5-ext.SPA.bin
128 -rwx 311284732 Mar 8 2018 09:05:40 +00:00 asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
2013200384 bytes total (399638528 bytes free)
Router#show version
Cisco IOS XE Software, Version 03.18.03.SP.156-2.SP3-ext
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 3 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by reload
System image file is "bootflash:/asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: advancedmetroipaccess
License Type: Permanent
Next reload license Level: advancedmetroipaccess
cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 900304K/6147K bytes of memory.
Processor board ID CAT2204ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
1974239K bytes of USB flash at usb0:.
Configuration register is 0x2102
Router#show ip interface brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0/0 unassigned YES NVRAM down down
GigabitEthernet0/0/1 unassigned YES NVRAM down down
GigabitEthernet0/0/2 unassigned YES NVRAM down down
GigabitEthernet0/0/3 unassigned YES NVRAM down down
GigabitEthernet0/0/4 unassigned YES NVRAM down down
GigabitEthernet0/0/5 unassigned YES NVRAM down down
GigabitEthernet0/0/6 unassigned YES NVRAM down down
GigabitEthernet0/0/7 unassigned YES NVRAM down down
GigabitEthernet0/0/8 unassigned YES NVRAM down down
GigabitEthernet0/0/9 unassigned YES NVRAM down down
GigabitEthernet0/0/10 unassigned YES NVRAM down down
GigabitEthernet0/0/11 unassigned YES NVRAM down down
GigabitEthernet0/0/12 unassigned YES NVRAM administratively down down //LICENSED
GigabitEthernet0/0/13 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/14 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/15 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/16 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/17 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/18 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/19 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/20 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/21 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/22 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/23 unassigned YES NVRAM administratively down down
Te0/0/24 unassigned YES NVRAM administratively down down
Te0/0/25 unassigned YES NVRAM administratively down down
Te0/0/26 unassigned YES NVRAM administratively down down
Te0/0/27 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM down down
Virtual-PPP4001 unassigned YES unset down down
Router#show run
Building configuration...
Current configuration : 3236 bytes
!
version 15.6
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
platform bfd-debug-trace 1
platform xconnect load-balance-hash-algo mac-ip-instanceid
platform tcam-parity-error enable
platform tcam-threshold alarm-frequency 1
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
no aaa new-model
facility-alarm critical exceed-action shutdown
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
multilink bundle-name authenticated
!
!
license udi pid ASR-920-24SZ-M sn CAT2204ABCD
license boot level advancedmetroipaccess
!
sdm prefer default
!
!
redundancy
!
!
!
!
!
transceiver type all
monitoring
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
!
interface GigabitEthernet0/0/1
no ip address
negotiation auto
!
interface GigabitEthernet0/0/2
no ip address
negotiation auto
!
interface GigabitEthernet0/0/3
no ip address
negotiation auto
!
interface GigabitEthernet0/0/4
no ip address
negotiation auto
!
interface GigabitEthernet0/0/5
no ip address
negotiation auto
!
interface GigabitEthernet0/0/6
no ip address
negotiation auto
!
interface GigabitEthernet0/0/7
no ip address
negotiation auto
!
interface GigabitEthernet0/0/8
no ip address
negotiation auto
!
interface GigabitEthernet0/0/9
no ip address
negotiation auto
!
interface GigabitEthernet0/0/10
no ip address
negotiation auto
!
interface GigabitEthernet0/0/11
no ip address
negotiation auto
!
interface GigabitEthernet0/0/12
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/13
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/14
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/15
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/16
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/17
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/18
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/19
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/20
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/21
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/22
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/23
no ip address
shutdown
negotiation auto
!
interface TenGigabitEthernet0/0/24
no ip address
shutdown
!
interface TenGigabitEthernet0/0/25
no ip address
shutdown
!
interface TenGigabitEthernet0/0/26
no ip address
shutdown
!
interface TenGigabitEthernet0/0/27
no ip address
shutdown
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
no ip address
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip tftp source-interface GigabitEthernet0
ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
!
!
!
!
control-plane
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
!
!
!
end
Router#copy usb0:/asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin bootflash:/
Destination filename [asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin]?
Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<OUTPUT TRUNCATED>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Router#dir
Directory of bootflash:/
11 drwx 16384 Feb 15 2018 00:38:52 +00:00 lost+found
75521 drwx 4096 Feb 15 2018 00:38:59 +00:00 .prst_sync
12 -rw- 333554684 Feb 15 2018 00:52:46 +00:00 asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin
120833 drwx 4096 Feb 15 2018 00:40:50 +00:00 .installer
13 -rw- 1181 Feb 15 2018 00:56:18 +00:00 CAT2203ABCD_3_1518685123.lic
135937 drwx 4096 Feb 15 2018 01:01:49 +00:00 core
105729 drwx 4096 Feb 15 2018 01:02:03 +00:00 .rollback_timer
14 -rw- 0 Feb 15 2018 01:02:19 +00:00 tracelogs.114
45313 drwx 4096 Mar 7 2018 17:33:51 +00:00 tracelogs
90625 drwx 4096 Feb 15 2018 01:03:07 +00:00 virtual-instance
75522 drwx 4096 Jul 15 2014 01:09:40 +00:00 usb_modem
20 -rw- 35 Feb 15 2018 01:19:40 +00:00 pnp-tech-time
21 -rw- 16470 Feb 15 2018 01:19:45 +00:00 pnp-tech-discovery-summary
22 -rw- 311284732 Mar 7 2018 17:38:24 +00:00 asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
1339412480 bytes total (604782592 bytes free)
Router#show run | inc boot
boot-start-marker
boot-end-marker
license boot level advancedmetroipaccess
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#boot system bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S 7-ext.bin
Router(config)#end
Router#show run | inc boot
*Mar 7 17:39:54.228: %SYS-5-CONFIG_I: Configured from console by console i boot
boot-start-marker
boot system bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
boot-end-marker
license boot level advancedmetroipaccess
Router#reload
Proceed with reload? [confirm]
*Mar 7 17:41:42.169: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
*Mar 7 17:41:45.123: %IOSXE-5-PLATFORM: R0/0: kernel: [ 928.911208] usb 1-1: USB disconnect, address 2Mar 7 17:42:20.583 R0/0: %PMAN-5-ÃUEA platform with 3670016 Kbytes of main memory Located asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
Image size 311284732 inode num 22, bks cnt 75998 blk size 8*512
##################################################################################
##################################################################################
Boot image size = 311284732 (0x128dd3fc) bytes
pid_str[ASR-920-24SZ-M]
ROM:RSA Self Test hash Mismatch in long long word No. 0
ROM:Sha512 Self Test
Package header rev 2 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated f756f0e3:ae1eae7c:5742c1a0:5ee42ff4:9fe87a1c
expected f756f0e3:ae1eae7c:5742c1a0:5ee42ff4:9fe87a1c
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
Passing control to the main image..
<OUTPUT TRUNCATED>
Router#show version
Cisco IOS XE Software, Version 03.16.07.S - Extended Support Release
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.5(3)S7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 07-Feb-18 21:52 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 1 minute
Uptime for this control processor is 4 minutes
System returned to ROM by reload
System image file is "bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: advancedmetroipaccess
License Type: Permanent
Next reload license Level: advancedmetroipaccess
cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 909233K/6147K bytes of memory.
Processor board ID CAT2203ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
Configuration register is 0x2102
It has a modular fan tray at the back of the chassis.
The serial number sticker is found on top of the chassis.
Refer to this link for connecting the ASR 920 USB console cable. The Cisco ASR920 uses a USB console cable which is included in the box. There are a total of 4 USB ports on the ASR 920 front panel. You insert the USB console cable on the lower right USB port labeled: USB CONSOLE), which is under USB MEM slot. The other USB end goes to your PC USB port. You need to install the appropriate USB driver on your PC.
These are the USB-to-RJ45 serial console kit (920-CONS-KIT-S), which is used for console out-of-band server. This cable adapter uses the lower left USB port labeled: CONSOLE, which is under the MGMT port and near the Cisco logo.
You can insert a compatible USB key on the upper right USB port in order to transfer files such as the IOS-XE software.
Notice the LED lights on ports (G0/0/12-23) and Te0/0/24-27 are off (shutdown). You'll need a L-ASR920-1G-12 license in order to activate them.
For the USB console driver, double-click installer .exe file and follow the installation wizard.
Open HyperTerminal and create a new connection.
HyperTerminal will auto detect the COM port to be used.
Click Restore Defaults.
Once you know which COM to use, you can now open your favorite terminal emulator such as PuTTY, TeraTerm or SecureCRT. These are the settings I used in SecureCRT.
Below is the initial bootup and upgrade process for the Cisco ASR 920 router.
UEA platform with 3670016 Kbytes of main memory
no valid BOOT image found
Final autoboot attempt from default boot device...
Warning: filesystem is not clean
Warning: filesystem is not clean
Located asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin
Image size 333554684 inode num 12, bks cnt 81435 blk size 8*512
##################################################################################
##################################################################################
Boot image size = 333554684 (0x13e1a3fc) bytes
pid_str[ASR-920-24SZ-M]
ROM:RSA Self Test hash Mismatch in long long word No. 0
ROM:Sha512 Self Test
Package header rev 2 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated a3b0b3bc:8880efd3:2305ad5c:7c3ce271:d46331e3
expected a3b0b3bc:8880efd3:2305ad5c:7c3ce271:d46331e3
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
Passing control to the main image..
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 5 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 6 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 7 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 8 contained errors which were auto-corrected.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Tmpdisk creation successful, status = 0
flashfs[16]: 0 files, 1 directories
flashfs[16]: 0 orphaned files, 0 orphaned directories
flashfs[16]: Total bytes: 1935360
flashfs[16]: Bytes used: 1024
flashfs[16]: Bytes available: 1934336
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
registering for ASR ONLY!!!cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 900304K/6147K bytes of memory.
Processor board ID CAT2204ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
Press RETURN to get started!
*Mar 7 18:27:55.219: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Mar 7 18:27:57.249: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = ASR-920-24SZ-M Next reboot level = advancedmetroipaccess and License = advancedmetroipaccess
*Mar 7 18:28:19.237: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot Get the number of ports in MAC notification
*Mar 7 18:28:22.156: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Mar 7 18:28:22.157: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Mar 7 18:28:22.157: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed state to up
*Mar 7 18:28:22.158: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 7 18:28:22.176: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Mar 7 18:28:22.353: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Aborted by non-PnP bootstrapping)
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, changed state to up
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, changed state to up
*Mar 7 18:28:22.949: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 7 18:28:22.950: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, changed state to up
*Mar 7 18:28:23.205: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-intf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Mar 7 18:28:27.081: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 7 18:28:27.095: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled
*Mar 7 18:28:27.129: %SPA_OIR-6-OFFLINECARD: SPA (24xGE-4x10GE-FIXED-S) offline in subslot 0/0
*Mar 7 18:28:27.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
*Mar 7 18:28:29.767: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Mar 7 18:28:29.767: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Mar 7 18:28:29.768: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Mar 7 18:28:29.768: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Mar 7 18:28:29.852: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/0
Authentication passed
Router>enable
Router#
*Mar 7 18:29:41.269: %SPA_OIR-6-ONLINECARD: SPA (24xGE-4x10GE-FIXED-S) online in subslot 0/0
*Mar 7 18:29:41.270: %LICENSE-1-REQUEST_FAILED: License request for feature 24portGE-4port10GE 1.0 failed. UDI=ASR-920-24SZ-M:CAT2204ABCD
*Mar 7 18:29:42.817: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to down
*Mar 7 18:29:43.033: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to down
*Mar 7 18:29:43.034: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to down
*Mar 7 18:29:43.233: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/3, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/4, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/5, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/6, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/7, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/8, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/9, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/10, changed state to down
*Mar 7 18:29:43.234: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/11, changed state to down
Router#
*Mar 7 18:29:47.199: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.986726] scsi 0:0:0:0: Direct-Access Imation Nano 1.20 PQ: 0 ANSI: 2
*Mar 7 18:29:47.204: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.990877] sd 0:0:0:0: Attached scsi generic sg0 type 0
*Mar 7 18:29:47.204: %IOSXE-5-PLATFORM: R0/0: kernel: [ 279.991327] sd 0:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
*Mar 7 18:29:47.525: %IOSXE-5-PLATFORM: R0/0: kernel: [ 280.313878] sd 0:0:0:0: [sda] Attached SCSI removable disk
Router#[OK]
Router#dir usb0:
Directory of usb0:/
<OUTPUT TRUNCATED>
124 -rwx 73635840 Aug 14 2017 10:51:06 +00:00 asa944-5-smp-k8.bin
125 drwx 32768 Feb 5 2018 10:27:50 +00:00 Anyconnect 3.1
126 -rwx 104970520 Feb 5 2018 15:53:40 +00:00 c3900-universalk9-mz.SPA.154-3.M6a.bin
127 -rwx 490064992 Feb 5 2018 15:53:10 +00:00 asr1001x-universalk9.03.13.05.S.154-3.S5-ext.SPA.bin
128 -rwx 311284732 Mar 8 2018 09:05:40 +00:00 asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
2013200384 bytes total (399638528 bytes free)
Router#show version
Cisco IOS XE Software, Version 03.18.03.SP.156-2.SP3-ext
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Tue 19-Sep-17 22:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 3 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by reload
System image file is "bootflash:/asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: advancedmetroipaccess
License Type: Permanent
Next reload license Level: advancedmetroipaccess
cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 900304K/6147K bytes of memory.
Processor board ID CAT2204ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
1974239K bytes of USB flash at usb0:.
Configuration register is 0x2102
Router#show ip interface brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0/0 unassigned YES NVRAM down down
GigabitEthernet0/0/1 unassigned YES NVRAM down down
GigabitEthernet0/0/2 unassigned YES NVRAM down down
GigabitEthernet0/0/3 unassigned YES NVRAM down down
GigabitEthernet0/0/4 unassigned YES NVRAM down down
GigabitEthernet0/0/5 unassigned YES NVRAM down down
GigabitEthernet0/0/6 unassigned YES NVRAM down down
GigabitEthernet0/0/7 unassigned YES NVRAM down down
GigabitEthernet0/0/8 unassigned YES NVRAM down down
GigabitEthernet0/0/9 unassigned YES NVRAM down down
GigabitEthernet0/0/10 unassigned YES NVRAM down down
GigabitEthernet0/0/11 unassigned YES NVRAM down down
GigabitEthernet0/0/12 unassigned YES NVRAM administratively down down //LICENSED
GigabitEthernet0/0/13 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/14 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/15 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/16 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/17 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/18 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/19 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/20 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/21 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/22 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/23 unassigned YES NVRAM administratively down down
Te0/0/24 unassigned YES NVRAM administratively down down
Te0/0/25 unassigned YES NVRAM administratively down down
Te0/0/26 unassigned YES NVRAM administratively down down
Te0/0/27 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM down down
Virtual-PPP4001 unassigned YES unset down down
Router#show run
Building configuration...
Current configuration : 3236 bytes
!
version 15.6
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
platform bfd-debug-trace 1
platform xconnect load-balance-hash-algo mac-ip-instanceid
platform tcam-parity-error enable
platform tcam-threshold alarm-frequency 1
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
no aaa new-model
facility-alarm critical exceed-action shutdown
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
multilink bundle-name authenticated
!
!
license udi pid ASR-920-24SZ-M sn CAT2204ABCD
license boot level advancedmetroipaccess
!
sdm prefer default
!
!
redundancy
!
!
!
!
!
transceiver type all
monitoring
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
!
interface GigabitEthernet0/0/1
no ip address
negotiation auto
!
interface GigabitEthernet0/0/2
no ip address
negotiation auto
!
interface GigabitEthernet0/0/3
no ip address
negotiation auto
!
interface GigabitEthernet0/0/4
no ip address
negotiation auto
!
interface GigabitEthernet0/0/5
no ip address
negotiation auto
!
interface GigabitEthernet0/0/6
no ip address
negotiation auto
!
interface GigabitEthernet0/0/7
no ip address
negotiation auto
!
interface GigabitEthernet0/0/8
no ip address
negotiation auto
!
interface GigabitEthernet0/0/9
no ip address
negotiation auto
!
interface GigabitEthernet0/0/10
no ip address
negotiation auto
!
interface GigabitEthernet0/0/11
no ip address
negotiation auto
!
interface GigabitEthernet0/0/12
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/13
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/14
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/15
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/16
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/17
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/18
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/19
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/20
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/21
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/22
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/23
no ip address
shutdown
negotiation auto
!
interface TenGigabitEthernet0/0/24
no ip address
shutdown
!
interface TenGigabitEthernet0/0/25
no ip address
shutdown
!
interface TenGigabitEthernet0/0/26
no ip address
shutdown
!
interface TenGigabitEthernet0/0/27
no ip address
shutdown
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
no ip address
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip tftp source-interface GigabitEthernet0
ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
!
!
!
!
control-plane
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
!
!
!
end
Router#copy usb0:/asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin bootflash:/
Destination filename [asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin]?
Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<OUTPUT TRUNCATED>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Router#dir
Directory of bootflash:/
11 drwx 16384 Feb 15 2018 00:38:52 +00:00 lost+found
75521 drwx 4096 Feb 15 2018 00:38:59 +00:00 .prst_sync
12 -rw- 333554684 Feb 15 2018 00:52:46 +00:00 asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin
120833 drwx 4096 Feb 15 2018 00:40:50 +00:00 .installer
13 -rw- 1181 Feb 15 2018 00:56:18 +00:00 CAT2203ABCD_3_1518685123.lic
135937 drwx 4096 Feb 15 2018 01:01:49 +00:00 core
105729 drwx 4096 Feb 15 2018 01:02:03 +00:00 .rollback_timer
14 -rw- 0 Feb 15 2018 01:02:19 +00:00 tracelogs.114
45313 drwx 4096 Mar 7 2018 17:33:51 +00:00 tracelogs
90625 drwx 4096 Feb 15 2018 01:03:07 +00:00 virtual-instance
75522 drwx 4096 Jul 15 2014 01:09:40 +00:00 usb_modem
20 -rw- 35 Feb 15 2018 01:19:40 +00:00 pnp-tech-time
21 -rw- 16470 Feb 15 2018 01:19:45 +00:00 pnp-tech-discovery-summary
22 -rw- 311284732 Mar 7 2018 17:38:24 +00:00 asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
1339412480 bytes total (604782592 bytes free)
Router#show run | inc boot
boot-start-marker
boot-end-marker
license boot level advancedmetroipaccess
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#boot system bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S 7-ext.bin
Router(config)#end
Router#show run | inc boot
*Mar 7 17:39:54.228: %SYS-5-CONFIG_I: Configured from console by console i boot
boot-start-marker
boot system bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
boot-end-marker
license boot level advancedmetroipaccess
Router#reload
Proceed with reload? [confirm]
*Mar 7 17:41:42.169: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
*Mar 7 17:41:45.123: %IOSXE-5-PLATFORM: R0/0: kernel: [ 928.911208] usb 1-1: USB disconnect, address 2Mar 7 17:42:20.583 R0/0: %PMAN-5-ÃUEA platform with 3670016 Kbytes of main memory Located asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin
Image size 311284732 inode num 22, bks cnt 75998 blk size 8*512
##################################################################################
##################################################################################
Boot image size = 311284732 (0x128dd3fc) bytes
pid_str[ASR-920-24SZ-M]
ROM:RSA Self Test hash Mismatch in long long word No. 0
ROM:Sha512 Self Test
Package header rev 2 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated f756f0e3:ae1eae7c:5742c1a0:5ee42ff4:9fe87a1c
expected f756f0e3:ae1eae7c:5742c1a0:5ee42ff4:9fe87a1c
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
Passing control to the main image..
<OUTPUT TRUNCATED>
Router#show version
Cisco IOS XE Software, Version 03.16.07.S - Extended Support Release
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.5(3)S7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 07-Feb-18 21:52 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 1 minute
Uptime for this control processor is 4 minutes
System returned to ROM by reload
System image file is "bootflash:asr920-universalk9_npe.03.16.07.S.155-3.S7-ext.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: advancedmetroipaccess
License Type: Permanent
Next reload license Level: advancedmetroipaccess
cisco ASR-920-24SZ-M (Freescale P2020) processor (revision 1.2 GHz) with 909233K/6147K bytes of memory.
Processor board ID CAT2203ABCD
24 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
Configuration register is 0x2102
