ASR920# dir
Directory of bootflash:/
11 drwx 16384 Oct 16 2015 21:37:46 +00:00 lost+found
15105 drwx 4096 Oct 31 2016 22:31:05 +00:00 .prst_sync
30209 drwx 4096 Apr 8 2021 21:34:51 +00:00 .installer
13 -rw- 1182 Oct 16 2015 21:51:23 +00:00 CAT1941V21234_1445051234.lic
14 -rw- 1176 Oct 16 2015 21:51:56 +00:00 CAT1941V25678_1445055678.lic
135937 drwx 4096 Apr 8 2021 21:25:23 +00:00 core
45313 drwx 4096 Oct 16 2015 21:56:47 +00:00 .rollback_timer
15 -rw- 0 Oct 16 2015 21:57:06 +00:00 tracelogs.809
120833 drwx 270336 May 29 2024 04:49:54 +00:00 tracelogs
60417 drwx 4096 Jul 15 2014 01:09:40 +00:00 usb_modem
32 -rw- 311284732 Mar 9 2018 10:36:53 +00:00 asr920-universalk9_npe.03.x.x.S.x-3.S7-ext.bin
30 -rw- 822 Mar 22 2016 16:11:14 +00:00 usb_modem_stats.txt
31 -rw- 467318537 Dec 16 2020 02:27:50 +00:00 asr920-universalk9_npe.16.x.x.SPA.bin
151044 drwx 4096 Apr 8 2021 21:39:04 +00:00 onep
33 -rw- 317446 Oct 31 2016 22:24:58 +00:00 crashinfo_RP_00_00_20161031-222450-UTC
34 -rw- 1586124 Dec 16 2020 01:53:56 +00:00 asr920_x_x_xr_s_rommon.pkg
151042 drwx 4096 Aug 4 2021 09:33:14 +00:00 .dbpersist
151043 drwx 4096 Apr 8 2021 21:39:09 +00:00 license_evlog
1339412480 bytes total (366039040 bytes free)
The startup-config is found in the nvram directory.
ASR920#dir nvram:
Directory of nvram:/
32769 -rw- 25314 <no date> startup-config
32770 ---- 3689 <no date> private-config
32771 -rw- 25314 <no date> underlying-config
1 ---- 462 <no date> persistent-data
2 -rw- 17 <no date> ecfm_ieee_mib
3 -rw- 3257 <no date> ifIndex-table
33554432 bytes total (33519233 bytes free)
To view the startup-config, use the more nvram:startup-config command:
ASR920#more nvram:startup-config
!
! Last configuration change at 10:25:49 UTC Thu May 16 2024 by nx
! NVRAM config last updated at 10:25:51 UTC Thu May 16 2024 by nx
!
version 16.12
no service pad
service timestamps debug datetime msec show-timezone
service timestamps log datetime msec show-timezone
service password-encryption
no platform punt-keepalive disable-kernel-core
platform bfd-debug-trace 1
platform xconnect load-balance-hash-algo mac-ip-instanceid
platform tcam-parity-error enable
platform tcam-threshold alarm-frequency 1
!
hostname ASR920
!
boot-start-marker
boot system bootflash:asr920-universalk9_npe.16.x.x.SPA.bin
boot system bootflash:asr920-universalk9_npe.03.xx.0x.S.1xx-3.S7-ext.bin
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
<OUTPUT TRUNCATED>
To perform a file transfer in a Cisco ASR920, use the copy nvram:startup-config <ftp/tftp://<REMOTE IP> command. Make sure the source interface can reach the remote file server.
ASR920#ping 172.27.5.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.27.5.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 196/196/196 ms
ASR920(config)#ip tftp source-interface Loopback0
ASR920(config)#end
ASR920#copy nvram:startup-config tftp://172.27.5.3
Address or name of remote host [172.27.5.3]?
Destination filename [startup-confg]?
!!
25314 bytes copied in 10.516 secs (2407 bytes/sec)
I renamed the file to startup-config2 (to avoid any file conflict), transferred it to the new Cisco ASR920, boot the new config using copy nvram:startup-config2 running-config and issued write memory to save config. Booting the new startup-config to running-config only took a few seconds.
This greatly speeds up staging a new router (in this case RMA replacement). It also lessens the human error if you have a big configuration file.
RMA_ASR920#copy nvram:startup-config2 running-config
Destination filename [running-config]?
%Log packet overrun, PC 0x111F6508, format:
User:%s logged command:%s
% Previously established LDP sessions will not be affected by this change.
% OSPF: Reference bandwidth is changed.
Please ensure reference bandwidth is consistent across all routers.
25080 bytes copied in 4.564 secs (5495 bytes/sec)
ASR920# // NOTICE THE HOSTNAME IMMEDIATELY CHANGED
ASR920#show ip interface brief
%
Authorization failed. // I'M UNABLE TO ISSUE COMMANDS SINCE IT HAS AAA CONFIGURED
