I often use the copy tftp flash command to perform an IOS upgrade on Cisco devices. The download software (from Cisco.com) for a Cisco ME-3600X switch is a .tar file, which is a compressed file that includes the .bin (bare image) and other HTML files.
The upgrade/downgrade of newer Cisco switch is now easier with the archive download-sw command. It's similar to the copy tftp flash command except that it will auto extract the .tar file, delete the existing .bin file and copy the new IOS.
We're using the ME switch as an aggregate Layer 3 switch for all Metro E client circuits. Most client router has Ethernet handoff and we don't need to keep on adding up Ethernet cards and schedule maintenance window on our PE routers. Here are some photos of the ME-3600X-24TS-M and the IOS upgrade procedure that I performed.
Using driver version 1 for media type 1
Base ethernet MAC Address: 0c:f5:a4:88:c4:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1290240
mifs[2]: Bytes used : 788992
mifs[2]: Bytes available : 501248
mifs[2]: mifs fsck took 1 seconds.
mifs[3]: 3 files, 1 directories
mifs[3]: Total bytes : 4386816
mifs[3]: Bytes used : 3215872
mifs[3]: Bytes available : 1170944
mifs[3]: mifs fsck took 0 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 10240
mifs[4]: Bytes available : 247808
mifs[4]: mifs fsck took 1 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 10240
mifs[5]: Bytes available : 247808
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 11 files, 3 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 33608192
mifs[6]: Bytes available : 24323584
mifs[6]: mifs fsck took 7 seconds.
...done Initializing Flash.
done.
SD card is not present. // ME SWITCH USE AN EXTERNAL SD CARD
Loading "flash:/me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
<OUTPUT TRUNCATED>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.4(3)S1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 29-Oct-14 10:47 by prod_rel_team
Initializing flashfs...
Using driver version 1 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1290240
mifs[4]: Bytes used : 788992
mifs[4]: Bytes available : 501248
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
mifs[5]: 3 files, 1 directories
mifs[5]: Total bytes : 4386816
mifs[5]: Bytes used : 3215872
mifs[5]: Bytes available : 1170944
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 10240
mifs[6]: Bytes available : 247808
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 10240
mifs[7]: Bytes available : 247808
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.
mifs[8]: 11 files, 3 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 33608192
mifs[8]: Bytes available : 24323584
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
%No working directory set
%No working directory set
%No working directory set
%No working directory set
Tmpdisk creation successful, status = 0
flashfs[18]: 0 files, 1 directories
flashfs[18]: 0 orphaned files, 0 orphaned directories
flashfs[18]: Total bytes: 1935360
flashfs[18]: Bytes used: 1024
flashfs[18]: Bytes available: 1934336
Control Processor Memory Error detection enabled
Waiting for I2C Bus Check...Complete
Checking for pSoC Firmware upgrade..
not needed
Checking Control FPGA Firmware upgrade.. not needed
POST: Timing Tests : Begin
POST: Timing Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: Port ASIC Loopback Tests : Begin
POST: Port ASIC Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 983040K/65528K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853N456
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902H123
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00ABC
Press RETURN to get started!
*Mar 1 00:00:13.155: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jan 2 00:00:00.671: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = me3600 Next reboot level = AdvancedMetroIPAccess and License = AdvancedMetroIPAccess
*Jan 2 00:00:01.367: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Input signal on power supply 2 is faulty
*Jan 2 00:00:01.367: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Output signal on power supply 2 is faulty
*Jan 2 00:02:47.815: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Jan 2 00:03:00.139: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 31 01:42:00.399: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 31 01:42:03.803: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 31 01:42:04.839: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.4(3)S1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 29-Oct-14 10:47 by prod_rel_team
*Mar 31 01:42:04.939: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Mar 31 01:42:05.779: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Mar 31 01:42:05.799: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
*Mar 31 01:42:05.939: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
Switch>enable
Switch#show run interface vlan 1
Building configuration...
Current configuration : 48 bytes
!
interface Vlan1
no ip address
shutdown
end
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface vlan 1
Switch(config-if)#ip address 1.1.1.1 2 255.0.0.0
Switch(config-if)#no shutdown
Switch(config-if)#
*Mar 31 01:44:09.915: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Mar 31 01:44:19.523: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Mar 31 01:44:20.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
Switch(config-if)#end
Switch# ping 1.1.1.1 // PING TO TFTP SERVER/PC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/201/1004 ms
Switch#
*Mar 31 01:47:02.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Switch#archive download-sw /overwrite tftp://1.1.1.1/me360x-universalk9-tar
Ramdisk creation successful, status = 0
flashfs[27]: 0 files, 1 directories
flashfs[27]: 0 orphaned files, 0 orphaned directories
flashfs[27]: Total bytes: 41158656
flashfs[27]: Bytes used: 1024
flashfs[27]: Bytes available: 41157632
Loading me360x-universalk9-tar.152-4.S4.tar from 1.1.1.1 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 26818560 bytes]
Loading me360x-universalk9-tar.152-4.S4.tar from 1.1.1.1 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please wait till you receive the "Image Extraction Done" success message, or any other message reporting Failure !!!!!
examining image...
extracting info (87 bytes)
extracting me360x-universalk9-mz.152-4.S4/info (373 bytes)
extracting info (87 bytes)
System Type: 0x00010000
Ios Image File Size: 0x01687A00
Total Image File Size: 0x01993A00
Minimum Dram required: 0x08000000
Image Suffix: universalk9-152-4.S4
Image Directory: me360x-universalk9-mz.152-4.S4
Image Name: me360x-universalk9-mz.152-4.S4.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Original_path = flash:me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin
Backup_path = me360x-universalk9-mz.154-3.S1.bin
Backup_dir = me360x-universalk9-mz.154-3.S1
Ignoring backup option...
Old image for switch: flash:/me360x-universalk9-mz.154-3.S1
Old image will be deleted before download.
Deleting `flash:/me360x-universalk9-mz.154-3.S1' to create required space
Extracting images from archive into flash...
me360x-universalk9-mz.152-4.S4/ (directory)
extracting me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin (23617651 bytes)
extracting me360x-universalk9-mz.152-4.S4/me360x-mfpga.bit (2917810 bytes)
extracting me360x-universalk9-mz.152-4.S4/info (373 bytes)
me360x-universalk9-mz.152-4.S4/html/ (directory)
extracting me360x-universalk9-mz.152-4.S4/html/foo.html (0 bytes)
extracting me360x-universalk9-mz.152-4.S4/controlfpga.bin (235868 bytes)
extracting me360x-universalk9-mz.152-4.S4/psoc.dld (34378 bytes)
extracting info (87 bytes)
Installing (renaming): `ramfs:update/me360x-universalk9-mz.152-4.S4' ->
`flash:me360x-universalk9-mz.152-4.S4'
Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
New software image installed in flash:/me360x-universalk9-mz.152-4.S4
Ignoring backup option...
All software images installed.
Deleting Ramdisk
Switch#reload
System configuration has been modified. Save? [yes/no]: no
Proceed with reload? [confirm]
*Mar 31 02:06:23.347: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Using driver version 1 for media type 1
Base ethernet MAC Address: 0c:f5:a4:88:c4:12
Xmodem file system is available.
The password-recovery mechanism is enabled.
*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1290240
mifs[2]: Bytes used : 788992
mifs[2]: Bytes available : 501248
mifs[2]: mifs fsck took 0 seconds.
mifs[3]: 3 files, 1 directories
mifs[3]: Total bytes : 4386816
mifs[3]: Bytes used : 3215872
mifs[3]: Bytes available : 1170944
mifs[3]: mifs fsck took 1 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 10240
mifs[4]: Bytes available : 247808
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 10240
mifs[5]: Bytes available : 247808
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 6 files, 2 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 23820288
mifs[6]: Bytes available : 34111488
mifs[6]: mifs fsck took 5 seconds.
...done Initializing Flash.
done.
SD card is not present.
Loading "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
<OUTPUT TRUNCATED>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
Initializing flashfs...
Using driver version 1 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1290240
mifs[4]: Bytes used : 788992
mifs[4]: Bytes available : 501248
mifs[4]: mifs fsck took 1 seconds.
mifs[4]: Initialization complete.
mifs[5]: 3 files, 1 directories
mifs[5]: Total bytes : 4386816
mifs[5]: Bytes used : 3215872
mifs[5]: Bytes available : 1170944
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 10240
mifs[6]: Bytes available : 247808
mifs[6]: mifs fsck took 1 seconds.
mifs[6]: Initialization complete.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 10240
mifs[7]: Bytes available : 247808
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 6 files, 2 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 23820288
mifs[8]: Bytes available : 34111488
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
%No working directory set
%No working directory set
%No working directory set
%No working directory set
Control Processor Memory Error detection enabled
Waiting for I2C Bus Check...Complete
Checking for pSoC Firmware upgrade..
not needed
Checking Control FPGA Firmware upgrade.. not needed
POST: Timing Tests : Begin
POST: Timing Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: Port ASIC Loopback Tests : Begin
POST: Port ASIC Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 1015808K/32760K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853NABC
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902H456
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00XYZ
license udi pid ME-3600X-24TS-M sn FCW1902H123
^
% Invalid input detected at '^' marker.
exception crashinfo file flash:crashinfo
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
*Mar 1 00:00:09.651: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = me3600 Next reboot level = AdvancedMetroIPAccess and License = AdvancedMetroIPAccess
*Mar 1 00:00:10.035: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Input signal on power supply 2 is faulty // PS 2 IS OFF
*Mar 1 00:00:10.035: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Output signal on power supply 2 is faulty
*Mar 1 00:02:56.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:03:05.495: Table type:0, total entries:1024
*Mar 1 00:03:05.495: Table type:1, total entries:1024
*Mar 1 00:03:07.951: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 31 02:10:41.331: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 31 02:10:44.383: %SYS-4-CONFIG_NEWER: Configuration from version 15.4 may not be correctly understood
*Mar 31 02:10:44.591: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Mar 31 02:10:44.647: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 31 02:10:45.683: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
*Mar 31 02:10:45.739: %SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 41 from vtp function vtp_download_info: Bad VLAN count
-Traceback= 66B458z 216252Cz 211BD98z 2D42F04z 2D3E1C8z
*Mar 31 02:10:45.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 31 02:10:46.583: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Mar 31 02:10:46.583: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
Switch> show version
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
ROM: Bootstrap program is WHALES boot loader
BOOTLDR: ME360x Boot Loader (ME360X-HBOOT-M), Version 12.2 [sourdutt-loader_release_ledfix 100]
Switch uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
--More-- compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: AdvancedMetroIPAccess
License Type: Permanent
Next reload license Level: AdvancedMetroIPAccess
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 1015808K/32760K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853NABC
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902HXYZ
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00ABC
Configuration register is 0xF
The upgrade/downgrade of newer Cisco switch is now easier with the archive download-sw command. It's similar to the copy tftp flash command except that it will auto extract the .tar file, delete the existing .bin file and copy the new IOS.
We're using the ME switch as an aggregate Layer 3 switch for all Metro E client circuits. Most client router has Ethernet handoff and we don't need to keep on adding up Ethernet cards and schedule maintenance window on our PE routers. Here are some photos of the ME-3600X-24TS-M and the IOS upgrade procedure that I performed.
Using driver version 1 for media type 1
Base ethernet MAC Address: 0c:f5:a4:88:c4:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1290240
mifs[2]: Bytes used : 788992
mifs[2]: Bytes available : 501248
mifs[2]: mifs fsck took 1 seconds.
mifs[3]: 3 files, 1 directories
mifs[3]: Total bytes : 4386816
mifs[3]: Bytes used : 3215872
mifs[3]: Bytes available : 1170944
mifs[3]: mifs fsck took 0 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 10240
mifs[4]: Bytes available : 247808
mifs[4]: mifs fsck took 1 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 10240
mifs[5]: Bytes available : 247808
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 11 files, 3 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 33608192
mifs[6]: Bytes available : 24323584
mifs[6]: mifs fsck took 7 seconds.
...done Initializing Flash.
done.
SD card is not present. // ME SWITCH USE AN EXTERNAL SD CARD
Loading "flash:/me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
<OUTPUT TRUNCATED>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.4(3)S1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 29-Oct-14 10:47 by prod_rel_team
Initializing flashfs...
Using driver version 1 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1290240
mifs[4]: Bytes used : 788992
mifs[4]: Bytes available : 501248
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
mifs[5]: 3 files, 1 directories
mifs[5]: Total bytes : 4386816
mifs[5]: Bytes used : 3215872
mifs[5]: Bytes available : 1170944
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 10240
mifs[6]: Bytes available : 247808
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 10240
mifs[7]: Bytes available : 247808
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.
mifs[8]: 11 files, 3 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 33608192
mifs[8]: Bytes available : 24323584
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
%No working directory set
%No working directory set
%No working directory set
%No working directory set
Tmpdisk creation successful, status = 0
flashfs[18]: 0 files, 1 directories
flashfs[18]: 0 orphaned files, 0 orphaned directories
flashfs[18]: Total bytes: 1935360
flashfs[18]: Bytes used: 1024
flashfs[18]: Bytes available: 1934336
Control Processor Memory Error detection enabled
Waiting for I2C Bus Check...Complete
Checking for pSoC Firmware upgrade..
not needed
Checking Control FPGA Firmware upgrade.. not needed
POST: Timing Tests : Begin
POST: Timing Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: Port ASIC Loopback Tests : Begin
POST: Port ASIC Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 983040K/65528K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853N456
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902H123
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00ABC
Press RETURN to get started!
*Mar 1 00:00:13.155: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jan 2 00:00:00.671: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = me3600 Next reboot level = AdvancedMetroIPAccess and License = AdvancedMetroIPAccess
*Jan 2 00:00:01.367: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Input signal on power supply 2 is faulty
*Jan 2 00:00:01.367: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Output signal on power supply 2 is faulty
*Jan 2 00:02:47.815: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Jan 2 00:03:00.139: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 31 01:42:00.399: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 31 01:42:03.803: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 31 01:42:04.839: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.4(3)S1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 29-Oct-14 10:47 by prod_rel_team
*Mar 31 01:42:04.939: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Mar 31 01:42:05.779: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Mar 31 01:42:05.799: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
*Mar 31 01:42:05.939: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
Switch>enable
Switch#show run interface vlan 1
Building configuration...
Current configuration : 48 bytes
!
interface Vlan1
no ip address
shutdown
end
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface vlan 1
Switch(config-if)#ip address 1.1.1.1 2 255.0.0.0
Switch(config-if)#no shutdown
Switch(config-if)#
*Mar 31 01:44:09.915: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Mar 31 01:44:19.523: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Mar 31 01:44:20.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
Switch(config-if)#end
Switch# ping 1.1.1.1 // PING TO TFTP SERVER/PC
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/201/1004 ms
Switch#
*Mar 31 01:47:02.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Switch#archive download-sw /overwrite tftp://1.1.1.1/me360x-universalk9-tar
Ramdisk creation successful, status = 0
flashfs[27]: 0 files, 1 directories
flashfs[27]: 0 orphaned files, 0 orphaned directories
flashfs[27]: Total bytes: 41158656
flashfs[27]: Bytes used: 1024
flashfs[27]: Bytes available: 41157632
Loading me360x-universalk9-tar.152-4.S4.tar from 1.1.1.1 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 26818560 bytes]
Loading me360x-universalk9-tar.152-4.S4.tar from 1.1.1.1 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please wait till you receive the "Image Extraction Done" success message, or any other message reporting Failure !!!!!
examining image...
extracting info (87 bytes)
extracting me360x-universalk9-mz.152-4.S4/info (373 bytes)
extracting info (87 bytes)
System Type: 0x00010000
Ios Image File Size: 0x01687A00
Total Image File Size: 0x01993A00
Minimum Dram required: 0x08000000
Image Suffix: universalk9-152-4.S4
Image Directory: me360x-universalk9-mz.152-4.S4
Image Name: me360x-universalk9-mz.152-4.S4.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Original_path = flash:me360x-universalk9-mz.154-3.S1/me360x-universalk9-mz.154-3.S1.bin
Backup_path = me360x-universalk9-mz.154-3.S1.bin
Backup_dir = me360x-universalk9-mz.154-3.S1
Ignoring backup option...
Old image for switch: flash:/me360x-universalk9-mz.154-3.S1
Old image will be deleted before download.
Deleting `flash:/me360x-universalk9-mz.154-3.S1' to create required space
Extracting images from archive into flash...
me360x-universalk9-mz.152-4.S4/ (directory)
extracting me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin (23617651 bytes)
extracting me360x-universalk9-mz.152-4.S4/me360x-mfpga.bit (2917810 bytes)
extracting me360x-universalk9-mz.152-4.S4/info (373 bytes)
me360x-universalk9-mz.152-4.S4/html/ (directory)
extracting me360x-universalk9-mz.152-4.S4/html/foo.html (0 bytes)
extracting me360x-universalk9-mz.152-4.S4/controlfpga.bin (235868 bytes)
extracting me360x-universalk9-mz.152-4.S4/psoc.dld (34378 bytes)
extracting info (87 bytes)
Installing (renaming): `ramfs:update/me360x-universalk9-mz.152-4.S4' ->
`flash:me360x-universalk9-mz.152-4.S4'
Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
New software image installed in flash:/me360x-universalk9-mz.152-4.S4
Ignoring backup option...
All software images installed.
Deleting Ramdisk
Switch#reload
System configuration has been modified. Save? [yes/no]: no
Proceed with reload? [confirm]
*Mar 31 02:06:23.347: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Using driver version 1 for media type 1
Base ethernet MAC Address: 0c:f5:a4:88:c4:12
Xmodem file system is available.
The password-recovery mechanism is enabled.
*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1290240
mifs[2]: Bytes used : 788992
mifs[2]: Bytes available : 501248
mifs[2]: mifs fsck took 0 seconds.
mifs[3]: 3 files, 1 directories
mifs[3]: Total bytes : 4386816
mifs[3]: Bytes used : 3215872
mifs[3]: Bytes available : 1170944
mifs[3]: mifs fsck took 1 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 10240
mifs[4]: Bytes available : 247808
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 10240
mifs[5]: Bytes available : 247808
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 6 files, 2 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 23820288
mifs[6]: Bytes available : 34111488
mifs[6]: mifs fsck took 5 seconds.
...done Initializing Flash.
done.
SD card is not present.
Loading "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
<OUTPUT TRUNCATED>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
Initializing flashfs...
Using driver version 1 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1290240
mifs[4]: Bytes used : 788992
mifs[4]: Bytes available : 501248
mifs[4]: mifs fsck took 1 seconds.
mifs[4]: Initialization complete.
mifs[5]: 3 files, 1 directories
mifs[5]: Total bytes : 4386816
mifs[5]: Bytes used : 3215872
mifs[5]: Bytes available : 1170944
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 10240
mifs[6]: Bytes available : 247808
mifs[6]: mifs fsck took 1 seconds.
mifs[6]: Initialization complete.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 10240
mifs[7]: Bytes available : 247808
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 6 files, 2 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 23820288
mifs[8]: Bytes available : 34111488
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
%No working directory set
%No working directory set
%No working directory set
%No working directory set
Control Processor Memory Error detection enabled
Waiting for I2C Bus Check...Complete
Checking for pSoC Firmware upgrade..
not needed
Checking Control FPGA Firmware upgrade.. not needed
POST: Timing Tests : Begin
POST: Timing Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: Port ASIC Loopback Tests : Begin
POST: Port ASIC Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 1015808K/32760K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853NABC
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902H456
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00XYZ
license udi pid ME-3600X-24TS-M sn FCW1902H123
^
% Invalid input detected at '^' marker.
exception crashinfo file flash:crashinfo
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
*Mar 1 00:00:09.651: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = me3600 Next reboot level = AdvancedMetroIPAccess and License = AdvancedMetroIPAccess
*Mar 1 00:00:10.035: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Input signal on power supply 2 is faulty // PS 2 IS OFF
*Mar 1 00:00:10.035: %PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: Output signal on power supply 2 is faulty
*Mar 1 00:02:56.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:03:05.495: Table type:0, total entries:1024
*Mar 1 00:03:05.495: Table type:1, total entries:1024
*Mar 1 00:03:07.951: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 31 02:10:41.331: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 31 02:10:44.383: %SYS-4-CONFIG_NEWER: Configuration from version 15.4 may not be correctly understood
*Mar 31 02:10:44.591: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Mar 31 02:10:44.647: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 31 02:10:45.683: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
*Mar 31 02:10:45.739: %SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 41 from vtp function vtp_download_info: Bad VLAN count
-Traceback= 66B458z 216252Cz 211BD98z 2D42F04z 2D3E1C8z
*Mar 31 02:10:45.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 31 02:10:46.583: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Mar 31 02:10:46.583: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
Switch> show version
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Sun 01-Sep-13 20:33 by prod_rel_team
ROM: Bootstrap program is WHALES boot loader
BOOTLDR: ME360x Boot Loader (ME360X-HBOOT-M), Version 12.2 [sourdutt-loader_release_ledfix 100]
Switch uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/me360x-universalk9-mz.152-4.S4/me360x-universalk9-mz.152-4.S4.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
--More-- compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: AdvancedMetroIPAccess
License Type: Permanent
Next reload license Level: AdvancedMetroIPAccess
cisco ME-3600X-24TS-M (PowerPC8572) processor (revision C0) with 1015808K/32760K bytes of memory.
Processor board ID FCW1902H123
Last reset from power-on
1 Virtual Ethernet interface
25 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
1536K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 0C:F5:A4:88:C4:12
Motherboard assembly number : 73-12694-06
Motherboard serial number : FOC1853NABC
Model revision number : C0
Motherboard revision number : C0
Model number : ME-3600X-24TS-M
System serial number : FCW1902HXYZ
Top Assembly Part Number : 800-32955-01
Top Assembly Revision Number : F0
Version ID : V01
CLEI Code Number : IPMSV00ABC
Configuration register is 0xF
No comments:
Post a Comment